The Twister Bell 47, Twister Medevac and Twister Hawk have demonstrated nearly unbelievable stability and have become household words on the micro heli scene. The Twister Aggressor2.4 adds to the pedigree and takes it to the next level of technology with more unbeatable features than ever before! State-of-the-art electronics in one package The new version '3-in-1' on-board electronics package includes piezo gyro, electronic mixers and speed controllers PLUS a computer fail-safe, an LED system check, and a motor safe-start facility! Fail-safe and safe-start In addition to the amazing LBW and MOPS damage prevention systems, the fail-safe cuts power to the main motor in the event of transmitter failure while the safe-start only allows starting when the throttle stick is low–so there is no danger of connecting the flight battery and inadvertently sending power instantly to the motors. Professional Planet 5 2.4GHz R/C included The transmitter and receiver have been designed for precision helicopter and aircraft flying and feature 2.4GHz Advanced FHSS control and high quality adjustable height stick units (convertible between Mode II (throttle left) and Mode I (throttle right)). The transmitter incorporates full 4-function control via dual axis control sticks and a 5th function for lights/retracts, etc, socket for an optional Flight Simulator cable set, reversing switches, moulded ergonomic rear and side grips, carry handle, neck strap hang point and a charging socket (for charging optional rechargeable transmitter batteries). High performance Li Poly battery and charger system Both a 12V automatic DC charger PLUS a 240 volt mains adaptor are included giving the option of charging from a 12 volt power source directly or 240 volt mains. Charge time is around 1 hour. Spares All spares are available through local model and hobby shops. Specifications Main Rotor Diameter - 340mm
Fuselage Length - 411mm
Planet 5 2.4GHz Advanced FHSS Transmitter
Flying Weight - 220g
The Bell UH-IB, better known as the 'Huey' or 'Iroquois', was developed by the U.S. army to transport troops and cargo during the Vietnam conflict and remains in service to this day. Hirobo .....
EFLH1400 by E-flite
A completely Ready-to-Fly 3D capable Mini-Heli for experienced helicopter pilots.
The Blade 400 3D is designed to give intermediate to advanced heli pilots a ready-to-fly experience like no other. It comes 100% factory built and flight tested so you can get flying right away. There is nothing left to assemble or set up. The Blade 400 3D is ready for hovering and 3D aerobatics as soon as you finish charging the battery. And you can fly it just about anywhere, anytime thanks to the included Spektrum 2.4GHz DX6i radio system that avoids interference with other RC users, even those on other 2.4GHz systems. You also get the benefit of the DX6i’s advanced DSM2 protocol that provides the kind of locked-in, solid response that will let you fly even the most demanding 3D maneuvers with absolute precision.
The Blade 400 3D is the first ready-to-fly mini-heli to come equipped with Spektrum’s advanced DX6i 2.4GHz DSM2™ 6-channel programmable computer aircraft system. Besides providing freedom from frequency restrictions and interference, the DX6i’s DSM2 technology offers other unique advantages like faster control response and innovative features such as ServoSync™. ServoSync automatically resequences transmitted data so mixed servos receive their pulses at the same time so you can fly extreme 3D aerobatics with absolute precision. The system also includes the feather-light, 4.4-gram Spektrum AR6100e Microlite Receiver.
Other DX6i features include: • Full-range capability • 10-model memory • Heli and airplane programming • Two types of swashplate mixing: standard or 120º CCPM • 3-axis dual rates and exponential • Travel adjust • Servo monitor • Two 5-point throttle curves • Three 5-point pitch curves • Revo mixing • Gyro sensitivy programming • Two programmable mixes The DX6i is not only perfectly suited for the Blade 400––it can also be used to fly just about any size and type of model due to its full-range and programming capabilities. E-flite uses top-quality engineering and materials in everything it makes, so you always get the maximum level of value and fun. And E-flite backs all of its products with the best customer service and support in the hobby so your electric flight experience is always a positive one.
FREYA 60
Specification Start System : Top Start Rotor Dia : 1,533mm Total Length : 1,375mm Weight : Approx 4,900g
Like its older bother the Eagle the Freya is based on a unitary construction system where the engine / fuel tank is in a separate module to the main mechanics/control system This makes servicing much easier particulary when on the flying field at a competition. . Push - pull cyclic controls . Tubular tail pushrod and tail mounted servo . Split main gear for driven tail during autorotations . High capacity rubber mounted fuel tank . One way bearing top starter shaft Ideal First 60 size Helicopter. Suitable Engine OS 60 SW-H WC or OS70 SZ-H
Futaba's engine management system GV-1 has caused quite a stir among the leading helicopter pilots who are using it. The reason for this is that the GV-1 Governor is not just a CSU (Constant Speed Unit), it also has a 9 point curve mixture control program, battery failsafe and a host of other functions. The GV-1 Monitors engine rpm, as opposed to main gear or rotor head speed, maintaining the engine rpm within 1% of its preset rpm. The GV-1 Control Amp has an 8 character LCD display with adjustable contrast, the Data Edit keys being set just below the display on the front panel. Scroll through software simplifies function setting. The GV-1 can also be used to display individually the engine rpm, rotor speed and battery voltage as well as all the other function set-ups.• Monitors engine rpm within 1%• Rotor gear ratio set-up function• Rotor speed display• Mixture control - 9 point curve• Mixture ATV• Mixture trim• Battery voltage display• Low battery display• Battery failsafe
Replacement magnets for GV-1 only.
FUTABA GY401 WITH SERVO
FUTABA GY611 GYRO WITH SERVO
